Linear lumber cut planner
Assign finished parts to stock with explicit kerf and end trim.
Stock & finished parts
Hypothetical starter inputs. Replace with measured project values. Results are temporary until exported.
Your cutting schedule
1.25 in kerf + 2 in end trim + 76.75 in unallocated remainder.
Longest-first, first-fit plan; not a guaranteed minimum. One kerf is reserved per part, including the final part. This conservative convention may reject an exact end fit. All parts must use the same cross-section and material.
Board-by-board layout
| Stock board | Parts (in) | Remainder (in) |
|---|---|---|
| 1 | Long rail 40 + Long rail 40 | 15.25 |
| 2 | Long rail 40 + Long rail 40 | 15.25 |
| 3 | Short rail 24 + Short rail 24 + Short rail 24 | 23.13 |
| 4 | Short rail 24 + Short rail 24 + Short rail 24 | 23.13 |
Keep a private record
Sign in to private projects to save this snapshot across sessions. Each save creates a named project record; it does not submit an inquiry.
Check grade, face quality, grain matching, defects and available stock lengths. This is a linear cut plan, not a structural layout, sheet nesting tool or saw-operation instruction.
Understand kerf and trim ยท Understand actual volume and tally